Sunday, 3 August 2014

Front Suspension Removal


Build Day 7

Having had the engine assessment back, it seems like a good idea to fully remove the front suspension and replace/refurbish as necessary.

The first step is to disconnect the gear selector mechanism which attached to the cross member.




Gear shift selector connection
With this detached the column has to be disconnected from the steering rack.

Steering column/rack connection
The font suspension is fixed to the body via four mounting bolts. Two at the front and two at the rear. While supporting the suspension with a Jack these bolts are undone and the whole assembly is then lowered and removed.

Fornt suspension is held in place with four mounting bolts

The whole assembly is removed in one piece

No comments:

Post a Comment